ENGLISH
HYW178機器參數
SPECIFICATION OF HYW178
HYW178 | ||||
注射裝置 injection unit | ||||
螺桿型號 screw size | A | B | C | |
螺桿直徑 screw diameter | mm | 42 | 45 | 48 |
螺桿長徑比 screw L/D RATIO | L/D | 22.5 | 21 | 19.7 |
理論注塑容積 theroetical shot volume | Cm3 | 330 | 379 | 432 |
注射重量 injection weight | g | 300 | 345 | 393 |
注射壓力 injection pressure | mpa | 203 | 176 | 155 |
螺桿轉速 screw speed | rpm | 148 | ||
合模裝置 clamping unit | ||||
合模力 clamping force | kn | 1780 | ||
移模行程 toggle stroke | mm | 410 | ||
拉桿間距 space between tie-bar | mm | 470*470 | ||
最大模厚 max. Mold thickness | mm | 500 | ||
最小模厚 min mold thickness | mm | 200 | ||
頂出行程 ejector stroke | mm | 120 | ||
頂出力 ejector force | kn | 39 | ||
頂出桿根數 ejector quantity | PC | 5 | ||
其它 others | ||||
最大油泵壓力 max.pump pressure | mpa | 16 | ||
油泵馬達功率 pump motor power | Kw | 18.2 | ||
電熱功率 heater power | kw | 9.6 | ||
機器重量 machine weight | T | 5.6 | ||
機器外形尺寸 machine outside size. | mm | 5000*1400*2100 | ||