ENGLISH
HYW125機器參數
SPECIFICATION OF HYW125
HYW125 | ||||
注射裝置 injection unit | ||||
螺桿型號 screw size | A | B | C | |
螺桿直徑 screw diameter | mm | 36 | 38 | 40 |
螺桿長徑比 screw L/D RATIO | L/D | 23.9 | 22 | 21 |
理論注塑容積 theroetical shot volume | Cm3 | 183 | 204 | 226 |
注射重量 injection weight | g | 167 | 185 | 205 |
注射壓力 injection pressure | mpa | 207 | 186 | 160 |
螺桿轉速 screw speed | rpm | 180 | ||
合模裝置 clamping unit | ||||
合模力 clamping force | kn | 1250 | ||
移模行程 toggle stroke | mm | 350 | ||
拉桿間距 space between tie-bar | mm | 390*390 | ||
最大模厚 max. Mold thickness | mm | 410 | ||
最小模厚 min mold thickness | mm | 180 | ||
頂出行程 ejector stroke | mm | 100 | ||
頂出力 ejector force | kn | 38 | ||
頂出桿根數 ejector quantity | PC | 5 | ||
其它 others | ||||
最大油泵壓力 max.pump pressure | mpa | 16 | ||
油泵馬達功率 pump motor power | Kw | 11 | ||
電熱功率 heater power | kw | 7 | ||
機器重量 machine weight | T | 3.7 | ||
機器外形尺寸 machine outside size. | mm | 4500*1300*1950 | ||